Rheological and sensory properties of hydrophilic skin protection gels based on polyacrylates

Introduction. With the current increases in occupational skin diseases, literature data attesting the decreasing efficiency of barrier creams with respect to the manufacturer’s declarations and legal regulations granting skin protection gels for employees, research is required to analyse and evaluate the recipes used for hydrophilic skin protection gels based on polyacrylates. Methods. This study investigated the rheological properties, pH and sensory perception of hydrophilic barrier gels based on polyacrylates. Results. The acrylic acid derivatives used were good thickeners, and helped to form transparent gels of adequate durability. They could be used to create hydrophilic films on the surface of the skin to protect it against hydrophobic substances. A correlation was shown between the results of the rheological properties and the barrier properties of the gels. This confirms the possibility of monitoring the quality of the gels at the stage of recipe development. Conclusions. Polyacrylates are viable for use in industry to produce hydrophilic barrier creams suitable for skin protection.     

Studies on reactions of ozone with alkenes

In the last years, a continuous increase of the O3 concentration has been recorded in the lower atmospheric layers. Photochemical reactions with NO(x), CO and organic compounds are the main sources of O3 in the troposphere. In this work, an attempt was made to determine the impact of alkenes on the O3 concentration in the troposphere. A study on the gas-phase reactions of 03 with 1-hexene, 1-heptene and 1-nonene was made. The reactions were carried out at room temperature under atmospheric pressure. Ozone was formed by the ultraviolet radiation emitted by a mercury lamp, in order to simulate the atmospheric conditions. The changes with time in the concentration of O3, 1-alkenes and formed aldehydes were investigated. Qualitative and quantitative analyses were done by means of the gas chromatography and colorimetry. The following products were identified: pentanal from 1-hexene; hexanal from 1-heptene; oktanal from 1-nonene. For each of the reactions, HCHO was also determined as a product. The reaction rate constants were calculated and obtained in units of 10(-17) cm(-3) molecule(-1) s(-1): 1.94-0.99 for 1-hexene, 5.54-4.51 for 1-heptene and 1.54-0.76 for 1-nonene. Based on the results obtained, an explanation of O3 concentration variations in the planetary boundary layer can be given. Last year a considerable increase of O3 concentration on the roads of Western Europe was recorded. This increase could have resulted from the decrease of alkene concentration in the air due to common use of the catalytic converters in cars. The unsaturated hydrocarbons rapidly oxidize on the catalyst. In Eastern Europe, where the amount of cars equipped with catalytic converters is smaller than in Western Europe, the alkene content in the exhaust fumes results in a decrease of the O3 concentration in the troposphere.     

Accumulation,speciation and localization of silver nanoparticles in the earthworm Eisenia fetida

Environmental Science and Pollution Research - The use of silver nanoparticles (AgNPs) in agriculture and many consumer products has led to a significant release of Ag in the environment. Although...     

The effects of cadmium or zinc multigenerational exposure on metal tolerance of Spodoptera exigua (Lepidoptera: Noctuidae)

The effects of ten generational zinc or cadmium pre-exposure on metal tolerance among beet armyworm Spodoptera exigua individuals were compared. These effects were assessed in animals from the 11th generation, reared on a diet either uncontaminated or contaminated with metal (cadmium or zinc). The survival rate of larvae and the degree of metal accumulation (in larvae, pupae and moths; among larval organs: gut and fat body) were analysed. Catalase, superoxide dismutase and glutathione transferase activity in larval organs of individuals subjected to different metal treatments were also measured. Animals transferred from control rearing to metals (cadmium or zinc) in the 11th generation, as well as those from multigenerational zinc treatment, but not from multigenerational cadmium treatment, had a significantly lower survival rate than control animals. Insects from the groups with the high metal treatment had high bioaccumulation factors (above 3.7 and 2.3 following cadmium and zinc, respectively). Cadmium (but not zinc) pre-exposure had a significant effect on metal accumulation in larvae. Multigenerational metal pre-exposure seemed to have mainly a negative effect on glutathione transferase activity in the gut of larvae from the 11th generation, in the case of the individuals exposed to metal other than that used in pre-exposure treatment or kept in control conditions. However, in the case of zinc pre-exposure, such effect was only apparent when zinc was replaced by cadmium. The long-term effect of cadmium on catalase activity in larvae was found.     

Spatial distribution of trace elements and ecotoxicity of bottom sediments in Rybnik reservoir,Silesian-Poland

Environmental Science and Pollution Research - The aim of study was to integrate chemical analyses and toxicity bioassays in order to assess the environmental risk connected with the presence of...     

The effect of clay catalyst on the chemical composition of bio-oil obtained by co-pyrolysis of cellulose and polyethylene

Cellulose/polyethylene (CPE) mixture 3:1, w/w with and without three clay catalysts (K10 – montmorillonite K10, KSF – montmorillonite KSF, B – Bentonite) addition were subjected to pyrolysis at temperatures 400, 450 and 500 °C with heating rate of 100 °C/s to produce bio-oil with high yield. The pyrolytic oil yield was in the range of 41.3–79.5 wt% depending on the temperature, the type and the amount of catalyst. The non-catalytic fast pyrolysis at 500 °C gives the highest yield of bio-oil (79.5 wt%). The higher temperature of catalytic pyrolysis of cellulose/polyethylene mixture the higher yield of bio-oil is. Contrarily, increasing amount of montmorillonite results in significant, almost linear decrease in bio-oil yield followed by a significant increase of gas yield. The addition of clay catalysts to CPE mixture has a various influence on the distribution of bio-oil components. The addition of montmorillonite K10 to cellulose/polyethylene mixture promotes the deepest conversion of polyethylene and cellulose. Additionally, more saturated than unsaturated hydrocarbons are present in resultant bio-oils. The proportion of liquid hydrocarbons is the highest when a montmorillonite K10 is acting as a catalyst.     

The use of ALS,botanical, and soil data to monitor the environmental hazards and regeneration capacity of areas devastated by highway construction

The impact of viaduct construction on the vegetation of a river valley was studied in Central Poland (Natura 2000 site PLH100006). The research aimed at assessing the suitability of ALS (airborne laser scanning), soil, and botanical data for monitoring the environmental effects of right-of-way reclamation 1 year after the road construction. Based on the data mentioned above, the following problems were identified: changes in topography and hydrological conditions of the valley as a result of improper land levelling, the use of inadequate soil for reclamation, no spontaneous regeneration of natural vegetation along the entire right-of-way, as well as the abundant occurrence of invasive species. The results of analysis were used to define strategies for mitigation of adverse impacts of the viaduct construction.